Any one who has taken in the craft of driving will undoubtedly cherish the vehicle they own. A completely working vehicle is a comfort to drive. With good support and care you can get your vehicle rolling for quite a while with no problem. But being a machine, a car is always producing some kind of issues. There are a wide range of issues that affect the performance of a car. Problems may be related to brakes, ignition, air suspension or at last engine issue. There are many defects that only require part replacement and that means getting your car back on the road in no time. There are many examples but replacing the spare part is not sufficient. You replace the spare parts and the issues still persist. You keep going back to the garage but the issue could not be fixed. When it’s any part other than the engine then that can be changed easily but if the problem is not fixed with the engine then this is a major engine issue as this might mean that you have to replace or recondition the complete engine.

Causes to Reconditioned the Engine

There are major signs when it’s proven to be a better option to recondition the engine then get it repaired.

Engine Heating Issue

Engine heating can be a major sign of a problem with your vehicle heating and cooling system or water pump system could be the culprit. When your engine starts to overheat faster than its a symbol of irreparable problems. Engine heating is not only a problem for the vehicle health but also can become a danger to you if you pay attention to it timely.

Too much Oil Consumption:

If your car starts to consume too much oil then it could be another sign of an irreparable problem. There could be several reasons such as worn out valve guides, seal dried issue , stuck oil control rings and too much cylinder to piston clearance. Worn out gaskets could be a cause but ultimately it’s a sign that you are required to recondition the engine.

Compression loss in the Engine

Compression loss is commonly the result of a leak in one or more of the cylinders caused by normal engine wear. Straightforward way to diagnose this problem is when your vehicle starts misfiring or works poorly in terms of performance. Only workable solution is to recondition the engine.

Engine Reconditioning Procedure

Procedure of engine reconditioning is delightful. Your engine is stripped down to bits to evaluate what caused the issue that resulted in reconditioning in the first place. During the strip down it is also observed which parts required replacement. After a thorough inspection, all the components go through chemical cleaning by being dipped in chemicals to remove the oil and residue from them.

This chemical cleaning makes sure that the parts are now without swarf that can damage the working of the engine. There are some parts that are replaced in almost all reconditioning procedures such as Rings, bearings, gaskets, seals, timing belt or chain, valve springs and oil pump. Some of the parts that are usually not replaced are camshafts, crankshafts, and pistons unless they are damaged to un-repairable status.

Once the process is furnished and all the parts are cleaned and changed, pressure testing of the cylinder head is done and valves showing heat signs are also changed. Brand New gaskets and oil seals are placed and the engine is re-constructed.

Advantages of Reconditioned Engine

Advantages of a reconditioned engine are ample. Your engine could be performing like an absolutely new engine once all the components are cleaned and the parts that need replacement are replaced. Following are some of the advantages that you can feel immediately.

Enhanced Life Span

First reconditioning is completed, the life span of each part is specific and the whole engine in common increases. Each part is checked and restored if necessary means that every part or component has a long life span and you enjoy the memorable journey . 

Enhanced Accuracy

If you are not working on the reconditioning process on the engine, you always worry about the accuracy of the engine. driving turns into a troubling undertaking as no one can really tell how the engine would work on lengthy drives or inside the city. One time you have reconditioned the engine then accuracy increases. Simply just start the car and drive anywhere without any second thought.

Enhanced Performance

If internally affected the engine loses many horsepower and its weaker functioning. Once the reconditioning process is completed, the power is enhanced and you can enjoy faults free performance as the result of restoring parts and engine clean that get rid of the residue that reduces the performance.

Better Fuel Consumption

As a result of the reconditioning process, your full engine is clean as a whistle. All
fuel lines are free running and with every bit cleaned off, you get best performance at enhanced fuel efficiency. You can feel a noticeable fuel consumption and better driving experience.

Friendly Environment

Trust  on it, reconditioning plays a vital or crucial  part in a friendly environment. Reconditioning of the engine means that various parts of the engine are saved from being manufactured which in part saves alloy and metals and ultimately it saves the environment.

Cost Effective Choice

It goes without saying that reconditioning the engine is more cost effective than buying a brand new engine. You can target a particular area of the engine that requires detailed checkup and can get that refurbished instead of replacing the full engine. Brand New engine would without a doubt cost way more than the reconditioned engine.

Based one the opinion above, it’s clear as daylight that a reconditioning  engine is the best, cheap and environment friendly choice. Advantages of a reconditioned engine  outweighs the limitations. Electing the reconditioning of the engine requires proper preparation and research as this process can only be done by experienced and well equipped garage that are equipped with modern tools and know the due practices.

Range Rover Engine Specialists offer rebuild, remanufactured and reconditioned range rover engines at unbeatable prices. We also offer supply and fit service in the UK. Further more details: Contact us at

Facebook: https://web.facebook.com/rangeroverenginespecialists/?_rdc=1&_rdr

Twitter: https://twitter.com/e_rangerover

Pinterest:https://www.pinterest.co.uk/RangeRover_Engine_Specialis/_saved/

So don’t hesitate to contact us.